Automated Conveyor Technology for Stacker Cranes in High Rise Storage Facilities and Small Parts Warehouses
LEBEN manufactures industrial shock absorbers for automated material handling, warehouse systems and storage and retrieval machines (SRMs) in high-bay and automated miniload warehouses. These installations are also known as automated storage and retrieval systems (AS/RS). COMPENSER® damping elements limit the forces generated at the end of travel and absorb the kinetic energy of travelling or lifting mechanisms. Selection depends on whether the application requires emergency impact protection or damping during a regularly repeated operating cycle.
Horizontal Application in the Field of Conveyor Technology:
Problem:
Storage and retrieval machines travel at high speed along warehouse aisles. During normal operation, the electric braking system decelerates the machine before it reaches the aisle ends. If the control or braking function fails, the travelling mechanism may strike the end stop with considerable residual velocity. In addition to the moving mass and payload, the impact velocity and any driving forces that continue to act determine the load. A hard impact can damage the storage and retrieval machine, the racking structure and adjacent parts of the building.
Solution:
End-of-travel damping can be provided by a travelling COMPENSER® DC-Series unit acting in both directions of travel, or by single-acting COMPENSER® C-Series units. A CE-Series crash element can also be used for an end stop intended exclusively for emergency operation. Hydraulic buffers dissipate energy through a damping medium, whereas the CE Series absorbs energy by permanent deformation and is replaced after activation. In the design emergency event, the shock absorbers decelerate the storage and retrieval machine at the maximum permissible deceleration or reaction force. Stroke and reaction force are matched to the permissible loads on the machine and its connections.
Where there are several contact points, the design also considers how the lifting carriage position, and therefore the centre of gravity, affects the load on each buffer.
Advantage:
In the design emergency event, end-of-travel damping protects the storage and retrieval machine, the racking structure and the building against impact damage and helps protect personnel. The defined deceleration distance prevents a hard impact at the aisle end and helps avoid prolonged operational interruptions.
Operational Routine Load Cycles of the Stacker Crane:
Efficiency is a major priority in fully automated high-bay warehouses. To maximise usable storage space, the storage and retrieval machine must reach the aisle ends. This results in repeated approaches to the end position and compression of the shock absorber piston rod. The industrial shock absorbers manufactured by LEBEN-Dämpfungstechnik GmbH are market leaders in applications involving cyclic loading, thanks to their particularly reliable and durable technology. To achieve trouble-free operation over several hundred thousand cycles, sensor monitoring is provided and an external accumulator is usually fitted to the buffer.
The design for this cyclic loading considers not only the energy per stroke but also the cycle frequency, the stroke actually used, the return force and the available return time. Routine approaches and additional emergency loads are assessed separately so that both operating conditions are taken into account when selecting the buffer.
For repeated damping cycles, energy absorption per hour, heat dissipation and ambient temperature are also considered. This allows the thermal load during ongoing operation to be assessed alongside the individual impact.
Vertical Application in the Field of Conveyor Technology:
Problem:
Lifting carriages, pallet lifts and telescopic lifts move loads vertically within a storage and retrieval machine. Mechanical defects or electronic control faults can cause an uncontrolled downward movement. Arresting the load requires consideration of both the moving mass and the gravitational force acting throughout the stopping distance. The available installation space also limits the usable deceleration distance.
Solution:
Single-acting COMPENSER® C-Series or CE-Series units can be mounted on the storage and retrieval machine to provide fall protection within the designated arresting zone. Alternatively, the damping elements are securely anchored to the building’s floor slab as a stationary emergency end stop. The vertical buffers arrest the falling mass at the maximum deceleration or reaction force permissible for the application. They are designed for the actual installation orientation and the specified load case. Where several elements are used, their arrangement and load distribution are also included in the design. Hydraulic damping or irreversible energy absorption by a crash element is selected according to the intended application.
Advantage:
In the design emergency event, the vertical industrial shock absorbers protect the lifting mechanism, warehouse equipment, building and personnel against the consequences of an unbraked impact. Controlled energy absorption limits the forces on the supporting structure and mountings. The end-of-travel buffer is coordinated with the other braking and safety functions of the storage and retrieval machine.