Vibration Absorption
LEBEN manufactures vibration dampers for tuned mass damping of tall structures, masts, towers, wind turbines, bridges and special constructions. As part of a tuned mass damper system, COMPENSER® dampers help limit unwanted structural movements. The design is based on the dynamic behaviour of the structure and the requirements of the tuned mass damper.
Mass in combination with a vibration absorber:
Problem:
Wind can excite slender and tall structures into vibration. For radio masts, towers, bridges and wind turbines, the natural frequencies and inherent structural damping are particularly relevant. Repeated deflections can affect usability and increase fatigue loading on components and connections. Static load analysis alone is therefore insufficient to describe this dynamic behaviour.
Effective tuned mass damping requires knowledge of the relevant mode shapes and excitation. In addition to maximum displacement, the vibration frequency and velocities at the damper installation point must be considered. These parameters form the basis for matching the auxiliary mass and damping.
Solution:
A tuned mass damper uses a moving auxiliary mass whose dynamic behaviour is matched to the structural vibration to be controlled. A COMPENSER® vibration damper damps relative movement between the auxiliary mass and the structure. Kinetic energy is converted into heat. The overall effect results from the interaction of the auxiliary mass, its suspension or spring system, and the damping characteristics.
The damper design considers parameters including movement amplitude, velocity, frequency and the required damping forces. The available stroke and permissible forces at the mounting points constrain the mechanical design. For outdoor installations, temperature conditions and corrosion protection requirements also form part of the specification. This allows the damping technology to be adapted to the interfaces and intended operating range of the tuned mass damper.
Tuning considers the natural frequency and associated modal mass of the mode to be controlled. If the relevant structural frequencies change, the tuned mass damper may need to be retuned.
Advantage:
Tuned mass damping matched to the structure reduces the displacement amplitude to the maximum value permissible for the structure. This limits dynamic loading and supports structural serviceability. The vibration damper dissipates the movement of the auxiliary mass in a controlled manner and limits its subsequent oscillation.
The achievable effect depends on the tuning of the complete system and the actual excitation conditions. The dynamic design data for the structure and the proposed tuned mass damper are therefore essential when selecting a COMPENSER® damper.